Download detailed description in PDF file

Technical parameters

Ambient temperature -40C...+60C
Hydraulic liquid - mineral oil based hydraulic oil
Viscosity 12..800mm2/s-permission range 12 ...800 mm2/s
Fluid temperature -15C...+80C
Filtration 10 to NAS 1638
Max operating pressure, P=250;T=50bar A,B = 300 bar
Leakage 10-15 cm3/min at 120 bar
Nominal flow 35 l/min


Manually or mechanically controlled hydraulic distributor Р38 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is similar to P35, but has outlets P and T on the side of openings A and B.


Р38 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Spool is made of carburized steel with hard chrome plating.


The distributor is fixed with two bolts M8.

Contact Us

Feel free to contact us with the form below, or call us at

1500 characters left