Download detailed description in PDF file


Technical parameters

Ambient temperature -40C...+60C
Hydraulic liquid - mineral oil based hydraulic oil
Viscosity 12..800mm2/s-permission range 12 ...800 mm2/s
Fluid temperature -15C...+80C
Filtration 10 to NAS 1638
Max operating pressure, P=250;T=50bar A,B = 300 bar
Leakage(A,B-T) 18cm3/min at 120bar
Nominal flow 80 l/min
Spool stroke +/- 7 mm
Actuating force < 220 N
Modification / Spools with 1 to 6


The hydraulic distributor Р80 is used for switching on/off and directing the working fluid between head flow generators (hydraulic pumps), head flow consumers (hydraulic cylinders, motors, etc.), and the tank. It is manufactured with up to 6 plungers with parallel or serial distribution.


The hydraulic distributor Р80 is a mono-block distributor with manual control. The body is made of cast iron EN-GJL300, and the spools are made of carburized steel with hard chrome plating.


The distributor is fixed with 3 (three) bolts М8.

Contact Us

Feel free to contact us with the form below, or call us at

1500 characters left